RBoy Apps
INSTALLING DEVICE HANDLERS

NOTE: You need to use the SmartThings Classic mobile app for installation AFTER which you can access the installed devices using the new SmartThings mobile app
  1. Click on the Device Handler you want to install, it will open a new window with the code, select the entire page (Ctrl+A) and copy (Ctrl+C)
  2. Login to the IDE at https://account.smartthings.com (create a Samsung Account one if you don't have one)
  3. Click on "My Locations" and then click on the name of the location where you want to install the device handler
  4. Click on "My Device Handlers"
  5. Click on "+New Device Handler" on the top right 
  6. Click "From Code"
  7. Paste the code (Ctrl+V) copied from Step 1 into the editor and click "Create"
  8. Click "Publish" and then "For me" on the top right 
  9. Now pair your device with the hub (see the SmartThings manual for pairing instructions)
If your device was paired before installing the Device Handler above, follow these additional steps to change the Device Handler used by your device:
    • In the IDE, click on "My Devices" on the top
    • Click on your existing device (thermostat/lock etc which you want to change) 
    • Scroll down and click on "Edit"
    • Under "Type *" select the new device handler you just created (it will show up at the bottom of the list)
    • Scroll to the bottom of the page and click "Update"


FOR UPDATING EXISTING DEVICE HANDLERS WITH A NEWER VERSION OF THE CODE:
  • Click on the Device Handler you want to install, it will open a new window with the code, select all (Ctrl+A) and copy the code (Ctrl+C)
  • Login to the IDE at https://account.smartthings.com
  • Click on "My Locations" and then click on the name of the location where you had installed the device handler previously
  • Click on "My Device Handlers"
  • Click on the Device Handler you want to update in the SmartThings IDE
  • Select all (Ctrl+A) and delete the old code, Paste (Ctrl+V) the new code
  • Click on "Save"
  • Click  on "Publish" and then click "For me"
  • Open the Device page on your phone in the Classic ST app, check/update your preferences (little gear icon on the top right) and tap "Done" or "Save". Now tap the "Refresh" tile (with the circular arrow).